Welder
Pala Group, Inc.
Convent, LA - May 09, 2025
texas
indiana
california
louisiana
alaska
pennsylvania
washington
minnesota
colorado
florida
british columbia
georgia
new mexico
michigan
west virginia
north dakota
arkansas
washington, dc
state of california
south carolina
kentucky
alabama
Description: The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.
Summary: Stick and Tig welding in multiple positions on various size piping (carbon and stainless) in an industrial environment. Welder must be able to read, study and interpret job specifications, plans and blue prints; able to climb and work from elevated work platforms; must have industrial welding experience; required to maintain clean and safe work environment.Essential Functions:
1. Reads and studies layout, blueprints, diagram, work order and welding procedures to determine work to be done. May also receive oral instructions.
2. Plans work in logical sequence and determines tools/equipment needed.
3. Lays out, positions, aligns and fits components together.
4. Bolts, clamps and tack welds parts to secure in position for welding.
5. Obtains specified electrode and inserts into portable holder or threads electrode wire through portable welding gun.
6. Connects cables from welding unit to obtain amperage, voltage, slope and pulse as specified.
7. Start power supply to produce electric current.
8. Strikes arc which generates heat to melt and deposit metal from electrode to work piece and joint edges.
9. Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead. This is judged by color of metal, sound of weld and size of molten puddle.
10. Welds in flat, horizontal, vertical and overhead positions and examines weld for bead size and other specifications.
11. Performs Stick(SMAW), TIG(GATW), and Flux Core Welding
12. Manually applies filler rod to supply weld metal.
13. Cleans or degreases weld joint or work piece using wire brush, grinder or chemical bath.
14. Chips off excess weld, slag, spatter.
15. Preheats work piece using torch or heating furnace.
16. Repairs products by dismantling, straightening, reshaping and reassembling parts.
Required Education and Experience:
- Minimum four years’ experience as a certified welder, or Two (2) years’ experience as Certified Welder plus 2 years’ ABC or equivalent training.
-
Experienced in stick and tig pipe welding.
-
Experienced in welding carbon, stainless steel and various alloys.
-
Must pass required welding test as required by the specific job site.
Preferred Education and Experience:
- High School or GED preferred but not required.
- Trade School program preferred but not required.
Go Back
Pipefitter Helper II
MasTec Industrial
755 W Murray Dr, Farmington, NM 87401
- New Mexico
- May 14, 2025
Apply
Pipefitter/Steamfitter
Western Michigan University
1903 West Michigan Avenue, Kalamazoo, MI 49008
- Michigan
- May 14, 2025
Apply
Pipefitter
American Contracting & Environmental Services Incorporated
11750 Capital Lane, Fredericksburg, VA 22408
- Virginia
- May 14, 2025
Apply
Pipefitter
US Department of Veterans Affairs
2615 E Clinton Ave, Fresno, CA 93703
- California
- May 14, 2025
Apply
